Wire Labels for Collins Equipment

By John May, K6MAY

The download below is a file containing wire labels for Collins Equipment. The labels support: KWM-2, 32S-3, 75S-3, 516F-2, 312B-4/5, and 30L-1. There are labels for all connectors found on the above equipment.

For best results, the labels should be printed out on a laser printer. Cut out each label. The labels are attached by placing the top of the label to the cable and wrapping the rest of the label around the cable.

The labels can be printed out on Avery labels. I have provided two formats: Avery 5165 Full Sheet (81/2 x 11) and Avery 5160 - 30 Address Labels. The 5160 labels will require a little less cutting. Clear Scotch tape can be wrapped over the top to protect each label. This label paper can be found in most office supply stores.

ALL PRINTERS ARE A LITTLE DIFFERENT!!! IF YOU CHOOSE TO USE THE 5160 LABELS, YOU MAY HAVE TO ADJUST THE TABLE CELL SIZES IN MS-WORD TO HAVE THE LABELS PRINT PROPERLY.

Collins Tip 4

Download
Download the K6MAY Collins Wire Labels 5165 - PDF FORMAT
Download
Download the K6MAY Collins Wire Labels 5160 - PDF FORMAT


Download
Download the K6MAY Collins Wire Labels 5165 - JPG FORMAT
Download
Download the K6MAY Collins Wire Labels 5160 - WORD FORMAT

Version 1.0 - Copyright © 2004. John May, K6MAY. All Rights Reserved


Back Home Forward